Enlighten::Errors

Classes

Name	Description
Enlighten::Errors::PE1000	This is a miscellaneous error.
Enlighten::Errors::PE1001	This error indicates that not enough memory was available for an allocation.
Enlighten::Errors::PE1002	This error indicates that a NULL pointer was given for a parameter which cannot be NULL.
Enlighten::Errors::PE2001	This error indicates that an IPrecompInputSystem has zero instances in it.
Enlighten::Errors::PE2002	This error indicates that an IPrecompInputSystem has an invalid irradiance budget in its IPrecompBuildParameters.
Enlighten::Errors::PE2003	No longer used, but kept to prevent future error messages from re-using the number.
Enlighten::Errors::PE2004	This error indicates that an IPrecompInputSystem has more than one instance with the same m_Id.
Enlighten::Errors::PE2005	This error indicates that an IPrecompInputSystem has an instance which references a geometry which has not been passed to the function.
Enlighten::Errors::PE2006	This error indicates that an IPrecompInputSystem has zero total surface area across all its target meshes.
Enlighten::Errors::PE2007	This error indicates that an IPrecompInputSystem has more than one instance with the same m_InstanceGuid.
Enlighten::Errors::PE2008	This error indicates that an IPrecompInputSystem refers to more than mesh with the same m_Guid.
Enlighten::Errors::PE2009	This error indicates that an IPrecompInputSystem has an estimated output pixel count greater than the allowed maximum (512 x 512)
Enlighten::Errors::PE2010	No longer used, but kept to prevent future error messages from re-using the number.
Enlighten::Errors::PE2011	This error indicates that an IPrecompInputSystem refers to an IPrecompPackedGeometry which does not have a required data block.
Enlighten::Errors::PE2012	This warning indicates that an IPrecompInputSystem has an instance which does not have a valid m_InstanceGuid.
Enlighten::Errors::PE2101	This error indicates that an IPrecompInputGeometry has zero meshes in it.
Enlighten::Errors::PE2102	This error indicates that an IPrecompInputGeometry has an invalid AutoUV parameter set.
Enlighten::Errors::PE2103	This error indicates that an IPrecompInputGeometry does not have at least one direct, target and indirect mesh.
Enlighten::Errors::PE2104	This error indicates that an IPrecompInputGeometry has an invalid output pixel size.
Enlighten::Errors::PE2105	This error indicates that the atlasSizeOverride property of an IPrecompInputGeometry is invalid.
Enlighten::Errors::PE2106	This warning indicates that an IPrecompInputGeometry has zero total 3D surface area or zero total UV surface area across all target meshes.
Enlighten::Errors::PE2107	This warning indicates that an IPrecompInputGeometry is set to be a terrain geometry, but its u and/or v parametrisation directions are not unit vectors.
Enlighten::Errors::PE2108	This warning indicates that an IPrecompInputGeometry is set to be a terrain geometry, but its u and v parametrisation directions are not orthogonal.
Enlighten::Errors::PE2109	This error indicates that an IPrecompInputGeometry is set to be a terrain geometry and has a requested number of Lightmap LODs greater than 1.
Enlighten::Errors::PE2110	This error indicates that an IPrecompInputGeometry has a requested number of Lightmap LODs set to a number that is smaller than 1.
Enlighten::Errors::PE2201	This error indicates that an IPrecompInputMesh is degenerate (has zero vertices or zero faces).
Enlighten::Errors::PE2202	This error indicates that an IPrecompInputMesh has an invalid AutoUV parameter.
Enlighten::Errors::PE2203	This error indicates that an IPrecompInputMesh has invalid direct/indirect/target flags.
Enlighten::Errors::PE2204	This warning indicates that a PrecompMeshProperties does not have a valid m_Guid.
Enlighten::Errors::PE2205	This error indicates that an IPrecompInputMesh has an invalid combination of target and detectSmoothBevels properties.
Enlighten::Errors::PE2301	This error indicates that a face in an IPrecompInputMesh indexes non-existent vertices Please make sure that the face references valid vertices.
Enlighten::Errors::PE2302	This warning indicates that some faces in an IPrecompInputMesh have an m_AlbedoId that has some of the 32 most-significant bits set.
Enlighten::Errors::PE2304	This warning indicates that the ShadowFaces behaviour has been set using both the old IPrecompBuildParameters::SetShadowFaces API and the new PrecompMaterialInfo::m_ShadowfaceBehaviourType API.
Enlighten::Errors::PE2401	This error indicates that a PrecompInputVertex in an IPrecompInputMesh has non-finite values Please make sure that the vertex has non-NaN and non-Inf values.
Enlighten::Errors::PE2506	Instance has a very high triangle density relative to its cluster size, which will cause the Enlighten precompute to take a very long time.
Enlighten::Errors::PE2601	The provided volume has holes that cannot be automatically repaired. To ensure probes are placed as you intended, provide a closed mesh with each edge adjacent to exactly two faces.
Enlighten::Errors::PE2602	The provided volume has holes that were automatically repaired. To ensure probes are placed as you intended, provide a closed mesh with each edge adjacent to exactly two faces.
Enlighten::Errors::PE3001	This warning indicates that a chart in an IPrecompInputGeometry has failed to pack as it is larger than the maximum atlas size.
Enlighten::Errors::PE3102	This error indicates that packing an IPrecompInputGeometry has failed due to there being too many charts to fit into the atlas, by assuming a minimum size for each chart.
Enlighten::Errors::PE3103	This error indicates that packing an IPrecompInputGeometry has failed as there was not enough space in the atlas.
Enlighten::Errors::PE3104	This error indicates that packing an IPrecompInputGeometry has failed due to non-finite UVs being produced by the projection/AutoUV stage.
Enlighten::Errors::PE3105	This error indicates that packing an IPrecompInputGeometry has failed due to an internal packing error.
Enlighten::Errors::PE3106	This warning indicates that the estimated packed size of an IPrecompInputGeometry is greater than the maximum of 512 x 512.
Enlighten::Errors::PE3201	This warning indicates that an instance in an IPrecompInputSystem has a transformation matrix which is not orthogonal.
Enlighten::Errors::PE3202	This warning indicates that an instance in an IPrecompInputSystem has UV scaling which would result in the "geom stamp" taking up more than the maximum solution size for the system in either dimension.
Enlighten::Errors::PE3301	This error indicates that packing an IPrecompInputSystem has failed due to inconsistent precomp block sizes on the geometries.
Enlighten::Errors::PE3302	This error indicates that packing an IPrecompInputSystem has failed as there was not enough space in the atlas.
Enlighten::Errors::PE3303	This error indicates that packing an IPrecompInputSystem has failed due to an internal packing error.
Enlighten::Errors::PE3304	Invalid input to PackSystem task for a terrain system.
Enlighten::Errors::PE3305	Failed to create an atlas for the system.
Enlighten::Errors::PE3306	General LOD packing error.
Enlighten::Errors::PE3307	A lod level is missing for a system.
Enlighten::Errors::PE3308	Inconsistent geom attributes when packing terrain system.
Enlighten::Errors::PE3309	Instances in a terrain system break constraints.
Enlighten::Errors::PE4001	This error indicates that Pre Clustering failed due to an internal error.
Enlighten::Errors::PE4002	This error indicates that Clustering failed due to an internal error.
Enlighten::Errors::PE4003	Number of clusters in a system has exceeded the maximum value.
Enlighten::Errors::PE7001	DEPRECATED.
Enlighten::Errors::PE7101	DEPRECATED.
Enlighten::Errors::PE7102	DEPRECATED.
Enlighten::Errors::PE7103	DEPRECATED.
Enlighten::Errors::PE7201	DEPRECATED.
Enlighten::Errors::PE7202	DEPRECATED.
Enlighten::Errors::PE7301	DEPRECATED.

Browser not supported