class Enlighten::IBakeInputSystem

└>Geo::IGeoSerialisable
└>Geo::IGeoReleasable

A triangle list and GBuffer of the incoming system.

Functions

Name	Description
AddMesh(const BakeInputMeshInfo &)	Call this for each mesh you want added, ensuring that the invisible meshes are not included in the standard lightmap, and that non-target meshes are not included in the Enlighten lightmap.
ComputeBoundingBox()	Lightmap UV debugging helpers.
Create()	Create a new IBakeInputSystem.
DilateTexture(Geo::GeoFp16Texture *)	Expand and dilate a provided albedo/emissive texture.
DumpPixelUVLayoutStats()	Various debugging helpers (can these be extracted into another API?)
DumpTriangleUVs(Geo::s32)	Various debugging helpers (can these be extracted into another API?)
Finalise()	Create GBuffers after all geometry is added.
GetBakePropertiesGuid()	Retrieves the GUID of the IBakeInputProperties passed into one of this class's methods.
GetBarycentricWeights(Geo::BaryWeights &, Geo::s32, Geo::v128)	Lightmap UV debugging helpers.
GetFaceIndex(const Geo::GeoGuid &, const Geo::s32 &, const Geo::s32 &, Geo::s32)	Map a mesh face index to a global bakesystem index.
GetFullName()	Get the full name.
GetHeight()	Returns the width and height of the internal GBuffer.
GetId()	The Guid for the IBakeInputSystem.
GetInstance(Geo::s32, Geo::GeoGuid &, Geo::s32 &, Geo::s32 &, Geo::s32 &, Geo::s32 &)	Get the geometry instances information.
GetIsUserLightmap()	Is this BakeSystem a user-defined lightmap (if not then it is an Enlighten system, used only for sampling indirect light).
GetLightmapUVs(Geo::s32)	Get the packed lightmap UVs for a geometry instance.
GetNumInstances()	Get the geometry instances information.
GetOutputIsIntensity()	Is this BakeSystem stores output as intensity value of the average light direction.
GetOutputType()	The output type for the system.
GetPixelBarycentricWeights(Geo::s32, Geo::s32, PixelBarycentricWeights &)	Extract barycentric weights for the pixel at this location.
GetPixelIndexForTriangle(Geo::s32 &, Geo::s32, const Geo::BaryWeights &)	Lightmap UV debugging helpers.
GetTriangleForUVCoordinate(float, float)	Lightmap UV debugging helpers.
GetUVCoordinateForTriangle(Geo::GeoPoint2 &, Geo::s32, const Geo::BaryWeights &)	Lightmap UV debugging helpers.
GetWidth()	Returns the width and height of the internal GBuffer.
LightMapHasBadUVFaces()	Lightmap UV debugging helpers.
Load(IGeoInputStream &, Geo::u32)	Load an instance of this class from an IGeoInputStream.
NonCopyable(NonCopyable &&)	Defaulted to allow move.
operator=(NonCopyable &&)	Defaulted to allow move.
Release()	Free this object that was created within the Enlighten libraries.
Save(IGeoStream &, Geo::u32)	Save an instance of this class to an IGeoStream.
SaveChartUVLayoutEps(const char *, Geo::s32, Geo::s32)	Various debugging helpers (can these be extracted into another API?)
SaveLightmapUVDebuggingRaySets(const char *, const Geo::v128 &, const Geo::v128 &)	Various debugging helpers (can these be extracted into another API?)
SavePixelTrianglesEps(const char *, Geo::s32)	Various debugging helpers (can these be extracted into another API?)
SavePixelTrianglesRaySet(const char *, Geo::s32, const Geo::v128 &, const Geo::v128 &)	Various debugging helpers (can these be extracted into another API?)
SaveTrianglePixelsEps(const char *, Geo::s32)	Various debugging helpers (can these be extracted into another API?)
SaveTrianglePixelsRaySet(const char *, Geo::s32, const Geo::v128 &, const Geo::v128 &)	Various debugging helpers (can these be extracted into another API?)
SaveUVDebuggingRaySet(const char *, const Geo::v128 &, const Geo::v128 &)	Various debugging helpers (can these be extracted into another API?)
SaveUVLayoutEps(const char *, Geo::s32, Geo::s32)	Various debugging helpers (can these be extracted into another API?)
SetBakeProperties(const IBakeInputProperties *)	Set the baking properties for this system.
SetFullName(const char *)	Set a globally unique name.
SetId(Geo::GeoGuid)	The Guid for the IBakeInputSystem.
SetIsUserLightmap(bool)	Is this BakeSystem a user-defined lightmap (if not then it is an Enlighten system, used only for sampling indirect light).

virtual bool Enlighten::IBakeInputSystem::AddMesh

public: bool AddMesh
(
const BakeInputMeshInfo & pMeshInfo
)

Call this for each mesh you want added, ensuring that the invisible meshes are not included in the standard lightmap, and that non-target meshes are not included in the Enlighten lightmap.

In order to use this method the bake properties must be set first.

Parameters

[in]

pMeshInfo

Contains properties of the mesh to be added

virtual Geo::GeoBoundingBox Enlighten::IBakeInputSystem::ComputeBoundingBox

public: Geo::GeoBoundingBox ComputeBoundingBox() const

Lightmap UV debugging helpers.

static IBakeInputSystem* Enlighten::IBakeInputSystem::Create

public: IBakeInputSystem * Create()

Create a new IBakeInputSystem.

virtual Geo::v128* Enlighten::IBakeInputSystem::DilateTexture

public: Geo::v128 * DilateTexture
(
Geo::GeoFp16Texture * texture
) const

Expand and dilate a provided albedo/emissive texture.

This should be done to the albedo and emissive textures used in UpdateRuntimeLighting to ensure that the texture sampling handles border pixels well.

virtual bool Enlighten::IBakeInputSystem::DumpPixelUVLayoutStats

public: bool DumpPixelUVLayoutStats() const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::DumpTriangleUVs

public: bool DumpTriangleUVs
(
Geo::s32 debugFaceIndex
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::Finalise

public: bool Finalise()

Create GBuffers after all geometry is added.

virtual Geo::GeoGuid Enlighten::IBakeInputSystem::GetBakePropertiesGuid

public: Geo::GeoGuid GetBakePropertiesGuid()

Retrieves the GUID of the IBakeInputProperties passed into one of this class's methods.

Return the Invalid GUID if hasn't been set yet.

virtual bool Enlighten::IBakeInputSystem::GetBarycentricWeights

public: bool GetBarycentricWeights
(
Geo::BaryWeights & triangleBarycentricWeights,
Geo::s32 faceIndex,
Geo::v128 position
) const

Lightmap UV debugging helpers.

virtual Geo::s32 Enlighten::IBakeInputSystem::GetFaceIndex

public: Geo::s32 GetFaceIndex
(
const Geo::GeoGuid & sys,
const Geo::s32 & instIdx,
const Geo::s32 & meshIdx,
Geo::s32 meshFaceIndex
) const

Map a mesh face index to a global bakesystem index.

virtual const char* Enlighten::IBakeInputSystem::GetFullName

public: const char * GetFullName() const

Get the full name.

virtual Geo::s32 Enlighten::IBakeInputSystem::GetHeight

public: Geo::s32 GetHeight() const

Returns the width and height of the internal GBuffer.

Note that this value is derived from the properties passed into the Finalise() method.

virtual Geo::GeoGuid Enlighten::IBakeInputSystem::GetId

public: Geo::GeoGuid GetId() const

The Guid for the IBakeInputSystem.

virtual bool Enlighten::IBakeInputSystem::GetInstance

public: bool GetInstance
(
Geo::s32 idx,
Geo::GeoGuid & oSys,
Geo::s32 & oInstIdx,
Geo::s32 & oMeshIdx,
Geo::s32 & oNumFaces,
Geo::s32 & oNumVerts
) const

Get the geometry instances information.

virtual bool Enlighten::IBakeInputSystem::GetIsUserLightmap

public: bool GetIsUserLightmap() const

Is this BakeSystem a user-defined lightmap (if not then it is an Enlighten system, used only for sampling indirect light).

virtual const Geo::GeoPoint2* Enlighten::IBakeInputSystem::GetLightmapUVs

public: const Geo::GeoPoint2 * GetLightmapUVs
(
Geo::s32 bakeInstanceIdx
) const

Get the packed lightmap UVs for a geometry instance.

virtual Geo::s32 Enlighten::IBakeInputSystem::GetNumInstances

public: Geo::s32 GetNumInstances() const

Get the geometry instances information.

virtual bool Enlighten::IBakeInputSystem::GetOutputIsIntensity

public: bool GetOutputIsIntensity() const

Is this BakeSystem stores output as intensity value of the average light direction.

virtual EBakeType Enlighten::IBakeInputSystem::GetOutputType

public: EBakeType GetOutputType() const

The output type for the system.

virtual bool Enlighten::IBakeInputSystem::GetPixelBarycentricWeights

public: bool GetPixelBarycentricWeights
(
Geo::s32 x,
Geo::s32 y,
PixelBarycentricWeights & out
) const

Extract barycentric weights for the pixel at this location.

Parameters

[in]	x	X Coordinate.
[in]	y	Y Coordinate.
[out]	out	Mesh/Triangle identifier and the barycentric weights of the pixel center.

Note

Enlighten converts all incoming meshes to CCW winding order; this means that the Barycentric coordinates created here may require reinterpretation when applied back to the source mesh. Unity and Unreal are examples of engines that would require flipping the order of weights, as they store meshes in CW winding order.

virtual bool Enlighten::IBakeInputSystem::GetPixelIndexForTriangle

public: bool GetPixelIndexForTriangle
(
Geo::s32 & pixelIndex,
Geo::s32 triangleIndex,
const Geo::BaryWeights & barycentricWeights
) const

Lightmap UV debugging helpers.

virtual Geo::s32 Enlighten::IBakeInputSystem::GetTriangleForUVCoordinate

public: Geo::s32 GetTriangleForUVCoordinate
(
float u,
float v
) const

Lightmap UV debugging helpers.

virtual bool Enlighten::IBakeInputSystem::GetUVCoordinateForTriangle

public: bool GetUVCoordinateForTriangle
(
Geo::GeoPoint2 & uv,
Geo::s32 triangleIndex,
const Geo::BaryWeights & barycentricWeights
) const

Lightmap UV debugging helpers.

virtual Geo::s32 Enlighten::IBakeInputSystem::GetWidth

public: Geo::s32 GetWidth() const

Returns the width and height of the internal GBuffer.

Note that this value is derived from the properties passed into the Finalise() method.

virtual bool Enlighten::IBakeInputSystem::LightMapHasBadUVFaces

public: bool LightMapHasBadUVFaces() const

Lightmap UV debugging helpers.

virtual bool Geo::IGeoSerialisable::Load

public: bool Load
(
IGeoInputStream & stream,
Geo::u32 section
)

Load an instance of this class from an IGeoInputStream.

The stream must be ready to read from. You can load sections of an object by passing a bitmask representing the desired sections rather than Iff::AllSectionsMask, which will load all sections. It is also safe to call this method on an object multiple times with different section arguments to load multiple parts.

Geo::NonCopyable::NonCopyable

public: NonCopyable
(
NonCopyable &&
)

Defaulted to allow move.

NonCopyable& Geo::NonCopyable::operator=

public: NonCopyable & operator=
(
NonCopyable &&
)

Defaulted to allow move.

virtual void Geo::IGeoReleasable::Release

public: void Release()

Free this object that was created within the Enlighten libraries.

Expect this to behave in a similar way to calling 'delete(this)'

virtual bool Geo::IGeoSerialisable::Save

public: bool Save
(
IGeoStream & stream,
Geo::u32 section
) const

Save an instance of this class to an IGeoStream.

The stream must be ready to write to. You can save sections of an object by passing a bitmask representing the desired sections rather than Iff::AllSectionsMask, which will save all sections that are available.

virtual bool Enlighten::IBakeInputSystem::SaveChartUVLayoutEps

public: bool SaveChartUVLayoutEps
(
const char * filename,
Geo::s32 triangleIndex,
Geo::s32 pixelIndex
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SaveLightmapUVDebuggingRaySets

public: bool SaveLightmapUVDebuggingRaySets
(
const char * filenamePrefix,
const Geo::v128 & scale,
const Geo::v128 & offset
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SavePixelTrianglesEps

public: bool SavePixelTrianglesEps
(
const char * filename,
Geo::s32 pixelIndex
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SavePixelTrianglesRaySet

public: bool SavePixelTrianglesRaySet
(
const char * filename,
Geo::s32 pixelIndex,
const Geo::v128 & scale,
const Geo::v128 & offset
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SaveTrianglePixelsEps

public: bool SaveTrianglePixelsEps
(
const char * filename,
Geo::s32 triangleIndex
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SaveTrianglePixelsRaySet

public: bool SaveTrianglePixelsRaySet
(
const char * filename,
Geo::s32 triangleIndex,
const Geo::v128 & scale,
const Geo::v128 & offset
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SaveUVDebuggingRaySet

public: bool SaveUVDebuggingRaySet
(
const char * filename,
const Geo::v128 & scale,
const Geo::v128 & offset
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SaveUVLayoutEps

public: bool SaveUVLayoutEps
(
const char * filename,
Geo::s32 triangleIndex,
Geo::s32 pixelIndex
) const

Various debugging helpers (can these be extracted into another API?)

virtual bool Enlighten::IBakeInputSystem::SetBakeProperties

public: bool SetBakeProperties
(
const IBakeInputProperties * pProps
)

Set the baking properties for this system.

This properties should be set in order to add meshes to this system.

Parameters

[in]

pProps

Baking properties to use.

Returns

True if passed in valid properties, False if pProps is NULL or has an invalid Guid

virtual void Enlighten::IBakeInputSystem::SetFullName

public: void SetFullName
(
const char * name
)

Set a globally unique name.

virtual void Enlighten::IBakeInputSystem::SetId

public: void SetId
(
Geo::GeoGuid id
)

The Guid for the IBakeInputSystem.

virtual void Enlighten::IBakeInputSystem::SetIsUserLightmap

public: void SetIsUserLightmap
(
bool v
)

Is this BakeSystem a user-defined lightmap (if not then it is an Enlighten system, used only for sampling indirect light).

Browser not supported